Partition Net Herringbone Net Ceiling Curtain Wall Metal Decorative Mesh
1. Product Introduction
The metal expanding net is a kind of Metal Mesh surface which expands the metal material to the original length of two to ten times. It is another name for the steel plate net given by the people in the south of China, also known as Metal Drawing Net, steel plate drawing net, stretching steel plate net, expanding steel plate net, metal plate net.
2. Parameter table
| EXPENDED FLATTENED MESH |
| LWD(mm) |
SWD(mm) |
Strand Width |
Strand Gauge |
%Free Area |
Approx.Kg/m2 |
| 6.05 |
3.38 |
0.5 |
0.8 |
50 |
2.1 |
| 10.24 |
5.84 |
0.5 |
0.8 |
75 |
1.2 |
| 10.24 |
5.84 |
0.9 |
1.2 |
65 |
3.2 |
| 3.80 |
2.10 |
0.8 |
0.6 |
46 |
2.1 |
| 14.20 |
4.80 |
1.8 |
0.9 |
52 |
3.3 |
| 24.40 |
7.10 |
2.4 |
1.1 |
57 |
3.4 |
| 23.20 |
5.80 |
3.2 |
1.5 |
43 |
6.3 |
| 32.70 |
10.90 |
3.2 |
1.5 |
59 |
4 |
| 33.50 |
12.40 |
2.3 |
1.1 |
71 |
2.5 |
| 42.90 |
14.20 |
4.6 |
2.7 |
58 |
8.6 |
| 39.10 |
18.30 |
4.7 |
2.7 |
60 |
7.6 |
| 43.20 |
17.08 |
3.2 |
1.5 |
69 |
3.2 |
| 69.80 |
37.10 |
5.5 |
2.1 |
75 |
3.9 |
3. Product application
The steel grating is specially developed for the application of mining industry. It solves the problem of mineral splashing on the plate surface. This series has a nominal size of 50 x 60 mm clearance plate, allowing most of the spilled material to fall through, thus ensuring a clean and safe plate surface, which is often designated for use in crushing systems, conveyor corridors and ball mills, processing plants and transfer stations, etc.
4. Product advantages
Good corrosion resistance; using kynar-500 and hylur500 As base material pvdf fluorocarbon paint can not fade for 25 years.
5. Production process
Punching, leveling and cutting processes will lead to sheet surface imperfections, but these imperfections in general industrial supplies are acceptable. If you have special requirements, we will be through such powder spray or paint, galvanizing, hot dip galvanizing, anodizing and other additional measures to prevent.
6. Installation method
In the installation of the piercing screen enclosure through the installation of holes to be installed directly with screws, so, in the early need to punch the screen around the relevant installation holes, which can ensure that the later fixed time is much easier, it just needs to be fixed.
7. Matters Needing Attention
After cleaning, attention should be paid to avoid secondary pollution of the punching net, to keep the punching net clean and tidy.
8. Packing method
Screw fixed, this is also a very good packaging method, this steel grid plate packaging method is still relatively popular, the selection of several different screw stem cross each other, with the guarantee of screw locking method, to ensure that the entire steel grid plate packaging.
Your message must be between 20-3,000 characters!
